New weldmark 140 mig welder,110V,HBT907340 ,

New weldmark 140 mig welder,110V,HBT907340 ,

Weldmark 140 MIG Welder,110V,HBT907340 , New!!
Built with Hobart quality and durability, the Weldmark 140 is a wire welding package with industrial performance capable of operating on standard 115/120 volts, 20 amp home circuits.
The Weldmark 140 is capable of running the following wires:
* Stainless Steel: .023-.035 in.
* Comfortable H-10 gun, 10 ft.
* Durable built-in Wire Feeder
* Built-in Shielding Gas solenoid
* Work clamp with 10 ft cable
* Spool of .030 in self-shielding
* Adapts to 4 or 8 inch (102 or 203mm) spools
* Weld Setup and Informational door chart
* Owner's manual with parts list, installation, operation and maintenance guidelines
Max output of 140 amps - Allows you to weld 24 gauge to 1/4" in. steel.
Excellant Arc Performance - Stable arc with improved performance on thin gauge material.
Replaceable, Built-in Contactor - Eases use and excellent safety feature which makes wire electrically "cold" until trigger is pulled.
Proven Built-in Wire Feeder with quick-release drive roll tension lever - Positive feed with adjustable tension plus easy accessibility to thread new wire.
Quick-change, Dual Groove Drive Roll - Easy to change from one wire size to another: .024/.025 or .030-.035.
Convenient Polarity Changeover with tip holder - Access makes it quick and easy to change polarity for Solid or Tubular Flux Cored wire plus includes convenient storage holes for spare contact tips.
Short Circuit Protection - Protects unit against current overload.
Self-resetting Thermal Overload - Protects power transformer to ensure reliability.
Self-resetting Motor Protection - Protects wire feed system from overload, no fuses to change or circuit buttons to reset.
Four Output Voltage settings with wirefeed tracking - make the unit easy to set and adjust for different materials and thicknesses.
Hobarts 5/3/1 Industrial Warranty - Five-year warranty on transformers, three years on electronics (drive motors, rectifiers) and one year on guns.
* 90 A, 19 VDC at 20% Duty Cycle
* 63 A, 21 VDC at 20% Duty Cycle
* .023 - .035 in (0.6 - 0.9mm) Solid
* .030 - .035 in (0.6 - 0.9mm) Flux Cored
* Money Orders & Cashier Checks may be sent to:
Please note: Personal Checks are accepted, but require extra-processing time.
* Orders generally take 5-6 Business Days to reach you.
If your package arrives damaged, please contact us to arrange the best way to handle your return.
Due to safety requirements involved with much of the equipment we carry, product returns of used equipment is handled on a case-by-case basis.