Rockford Industrial Area Revival Project - Moderated newsgroup   >   Motor Drives and Controls   >   I-shine floor finish wax chemical 25% solids gallon

I-shine floor finish wax chemical 25% solids gallon


I-shine floor finish wax chemical 25% solids gallon


From: Margaret Dickson
Subject I-shine floor finish wax chemical 25% solids gallon
Optical Enhancers Provide Shining Results
iShine is a 25% high solids floor finish that employs patented optically enhanced polymer technology that amplifies the over all gloss appearance and clarity of your floors. The unique blend possesses cutting edge raw materials to form a high solids finish that provides total protection in just four coats of finish.
In a 31-day test of iShine and a competitive product, iShine out-performed the competition in overall gloss, wear resistance, and gloss retention. With a higher than average gloss build and better than average gloss retention, iShine is proven effective over the competitions’ performance.
NON-YELLOWING, TRUE COLOR ENHANCEMENT:
iShine reflects the true coloration of flooring. Although an opalescence white product in the container, the product dries crystal clear and will not discolor or cast any yellowing tones to the floor. The actual color of the floor covering shines through while optical enhancers perfect blemishes.
iShine is a durable finish that has excellent scuffmark, water spot, black heel mark and powder resistance. The 25% solids floor finish is formulated to provide maximum protection.
SAVE ON LABOR COSTS - QUICK BUILIDING:
Since only four coats of finish are needed with iShine to provide superior protection, labor costs are minimized. And, unlike most high solids finishes, the new technology found in iShine creates great ease of application and incredible leveling. iShine’s high solid formula builds quickly offering more protection in each coat making 100% coverage easy to achieve with just four coats.
Some individuals may be sensitive to ingredients in this product. Before using, read product label and MSD sheet. If questions remain, consult your employer or a physician. Wet floors may be slippery. Prevent pedestrian traffic with signs or barricades.
1. Completely strip all old wax or floor finish. Depending upon build-up, use warm or room temperature water (80OF - 120OF) or (26oC – 49oC) and a Spartan Stripper: L.O.E. Stripper®, NAD-75, Square One®, Rinse Free Stripper, Shineline Emulsifier Plus®, or Green Solutions™ Floor Finish Remover.
2. Remove all stripping solution and follow with two to three clear water rinses.
3. When flooring is old, abused or damaged, we recommend two coats of a Spartan Sealer: On Base, Millennia Bright Dura Prime, or Shineline Seal®, although iShine may be used as a self-sealing finish.
4. Apply iShine in a uniform coat. Let dry thoroughly for 30 to 40 minutes until surface is dry to the touch. Apply subsequent coats in the same manner. Two to four coats are recommended.
Daily: Dust mop with Spartan’s Dust Mop/Dust Cloth Treatment™ and damp mop with Spartan Damp Mop or DMQ Neutral Disinfectant Cleaner.
Weekly: Dust floor with Spartan’s Dust Mop/Dust Cloth Treatment and damp mop with Spartan Damp Mop or DMQ Neutral Disinfectant Cleaner. To repair traffic areas between finish applications, use Spartan Bounce Back, Spraybuff or SunSwept. Be careful to follow Directions for Use. (Traffic lanes may be recoated as necessary.)
Monthly: Dust mop floor with Spartan’s Dust Mop/Dust Cloth Treatment and scrub with Shineline Multi Surface Cleaner. Reapply iShine as needed.
Yearly: Deep scrub with Shineline® Multi Surface Cleaner and recoat; or completely strip, reseal if necessary and reapply iShine.
NOTE: For best results always use Spartan floor cleaners and strippers.
Do not mix with other chemicals.
Specific Gravity - 1.036 @24OC/75OF
a. Storage @24OC/75OF - One year minimum
b. Accelerated @49OC/120OF - 60 days minimum
c. Freeze/Thaw - Can withstand three cycles
Static coefficient of friction meets or exceeds 0.5 as determined by ASTM method D-2047
Coverage - Up to 3,000 square feet per gallon depending on application method and porosity of floor
iShine is packaged in 330-gallon reusable totes; in 275-gallon reusable totes; recyclable HDPE (High Density Polyethylene) 55, 30, 15-gallon drums; 5-gallon pails; and gallons, 4 per case. Label copy is provided in English and Spanish.
Contact: Margaret-dickson@rockford-industrial.com (Margaret Dickson)




I-shine floor finish wax chemical 25% solids gallon