Senninger 7025 rd-1-1" f with nozzle sprinkler head

Senninger 7025 rd-1-1" f with nozzle sprinkler head

High Impact Plastic Sprinkler Head for the RainKart
We have sold over 1,000 of these fine sprinkler heads and have not had even one returned nor have we ever had a complaint of a problem with this head. Our experience is that these often outlast the brass heads.
The Senninger Irrigation F-luent-Master® sprinkler is designed specifically for disposing effluent by the land treatment method in accordance with EPA guidelines. It is suitable for use on solid-set systems. With minor modifications it can also be used on center pivots or other mechanical-move systems. The 70 series is designed to distribute water over a large diameter for higher volume systems.
• Flow range: 8.11 to 31.6 gpm (0.52 to 2.02 L/s)
• Sprinkler base pressure: 35 to 70 psi (2.5 to 5.0 bar)
• High-impact engineering-grade thermoplastic construction resists chemical degradation, scale buildup and UV effects
• Stainless steel springs and fulcrum pin enclosed to resist contamination; electrolysis eliminated by using no brass parts
• Lavender cap to correspond to industry standards denoting use of non-potable water
• Effluent vane minimizes obstruction from water-borne materials
• Nozzle sizes from 7/32" to 3/8" (#14 through #24) (5.6 to 9.5 mm)
• Also available in a double-nozzle model, flow range: 10.7 to 39.1 gpm (0.68 to 2.50 L/s)
Sprinkler chart available at our web site: rainkart.com