Pic development board plus w/ programmer for microchip

Pic development board plus w/ programmer for microchip

PIC Development Board + w/ Programmer
6. 1602 LCD with Yellow backlight ( Change to Blue backlight +$1.5 )
7. CD-ROM (Programmer Driver , PDF User manual , circuit , Sample code (C / ASM) , MPLAB 7.50 , PicBasic example etc.)
Compatible for OS including Windows 98, Windows 2000/NT, Windows XP , Windows 2003 and Vista
8. Dupont thread expansion connection 20x wire (Fig 8)
Sample with C and ASM Program sources code as below :
* 128x64 GLCD (See the following Photos)
* 1602 LCD (See the following Photos)
No refund when lost by wrong address
Online Video http:// /watch?v=XH_39RF9GGo
1. RS232 serial communication – to realize the communication between SCM and computer.
2. 24-way independent LED – to connect optionally with the port RA, RB and RC of SCM for indication of output high/low level at I/O port.
3. 4*4 Matrix keyboard – to test password lock and other items.
4. 8-way independent key-press–for easy various key-press input experiments and jumper setup for pull-up of port hardware.
5. 2-way A/D converter signal input.
6. Series of PIC experimental chip socket – including 8PIN, 14PIN, 18PIN, 20PIN, 28PIN, 40PIN, PIC10 series, and PIC16F57 special socket.
7. DS1302 clock – enclosed with battery with memory capacity.
8. Simulation debugging interface – to directly connect ICD1/ICD2/MCD1/MCD2 and carry out on-line simulation for on-board chips and resources.
9. IIC (I2C) communication – to read/write 24CXX series chips with hardware IIC or software IIC directly.
10. SPI communication–to read/write EEPROM of 93CXX with hardware SPI or software analog SPI,to select 8-bit or 16-bit read/write method through jumper.
11. 10-bit D/A converter – TLC5615 chip, direct digital-to-analog converter, on-board analog output interface .(TLC5615 is not include - $US 5)
12. DS18B20 digital temperature sensor – 1-wire bus communication, wide range for temperature measurement, high accuracy and sensitivity. .(DS18B20 is not include - US$3.3 for each)
13. Infrared remote-control receiver – to practice infrared remote-control decoding and all kinds of infrared remote control.
14. Buzzer voice/PWM output experiment – to practice normal voice, music and PWM output sound.
15. Clock selection – jumper for switch between various oscillation modes, to replace crystal vibration of different frequency as required by development of product.
16. On-board programming module – to communicate with computer through USB, adaptable for any kind of computer, special CPU supervision, stable programming, enclosed with ICSP interface and ICSP download cable, convenient on-line programming for other target board, programming control software with independent intellectual property rights, all functions of professional programmer.
17. On-board power module – can connect to the polarity of external AC or DC power supply optionally, voltage range 7-12V, current over 200MA; available for supply through USB without external power, ( External DC power supply is not include).
18. 12864-character LCD–128*64 lattices. (LCD is not include - US$15 for each (yellow) , US$18.5 for each (Blue)).
19. 1602-character LCD–internal 5*7 lattices, to display 16*2-character.
20. 6-bit 7-segment digital tube – to realize dynamic or static display experiment of digital tube, to display clock,temperature or to make counter.
http:// /watch?v=XH_39RF9GGo
Support the following devices for programming and experimental development：