Wheelock scsp-8RP single circuit safepath system voice

Wheelock scsp-8RP single circuit safepath system voice

SINGLE CIRCUIT SAFEPATH SYSTEM
The Single Circuit SAFEPATH® Panel is a stand alone, single channel, supervised audio fire and emergency evacuation system. Figure 2-1 on Page 2-2 illustrates the basic capabilities of the Single Circuit SAFEPATH Panel. The control panel that activates the Single Circuit SAFEPATH Panel can range from simple push buttons to a sophisticated computer based control panel providing dry contact closures.
The SAFEPATH Panel does not sense an emergency condition or hazards such as fire; it is only a part of a system that does sense such conditions. The SAFEPATH Panel, when activated, provides a prerecorded tone and/or voice message(s) to notification appliances. When used as part of a protective signaling system, the SAFEPATH Panel must be properly connected to a compatible control panel that has been approved by a nationally recognized testing laboratory ("LISTED") and to LISTED compatible notification appliances for proper operation.
• One zone of audio and strobe NAC outputs.
• Multiple contact closure inputs
• A hand held, push-to-talk microphone (PTT) for live, emergency voice announcements and instructions. The microphone overrides (mutes) any voice message or tones in progress.
• A multi-tone tone generator with 8 field selectable sounds for an optional evacuation signal.
• Visual NAC circuit of up to 2 amps at 24VDC. The visual NAC circuit may be selected to be compatible with Wheelock, Inc. synchronized or non-synchronized visual notification appliances.
• Supervised Audio Amplifier module (SAA-40S, or 80S/SE) power 25, 70.7 or 100-volt speakers, or Line Level Audio Amplifier (SALL-15S) to drive external power amplifiers and/or self-amplified speakers.
• Digital Voice Module (MDX-2) with a Standard Message Kit (SMK) containing 8 standard messages
• Full supervision with on-board diagnostics and trouble reporting circuits for:
• Audio NAC circuit wiring  open and short conditions
• Strobe NAC circuit wiring  open and short conditions
• Self Amplified power output circuit wiring  open and short conditions
*PLEASE SEARCH OUR STORE TO SEE MORE SECURITY PARTS*
WE HAVE MANY MANUFACTURERS CONTROL UNITS,
ANY OTHER COOL UPGRADES THAT CAN INCREASE THE CONVENIENCE, PERFORMANCE OR EASE
OF USE OF YOUR SECURITY SYSTEM!!
*PLEASE SEARCH OUR STORE TO SEE MORE SECURITY PARTS*
Go to fullsize imageGo to fullsize image
WE ARE NOT SECURITY SYSTEM EXPERTS. WE ARE LIQUIDATORS WHO HAVE PURCHASED A LARGE QUANTITY OF SECURITY SYSTEMS AND ACCESSORIES.
WE HAVE PROVIDED AS MUCH INFORMATION AS WE CAN. WE WILL CERTAINLY NOT BE HELPFUL WITH ANY INSTALLATION QUESTIONS OR PROBLEMS.
WE HAVE DONE THE ABSOLUTE BEST WE CAN TO PROPERLY REPRESENT OUR
If you have any questions, please contact us at your
convenience: IDEALTRADE@AOL.COM
Thanks for your consideration!! Good Luck!