New 220V 40 amps plasma cutter CUT40 amp plasma cutters

New 220V 40 amps plasma cutter CUT40 amp plasma cutters

GiantTechSales is proud to introduce our new line of "EXPERT" Cut40 AIR PLASMA CUTTERS
40 AMPS-(adjustable from 20 to 40)
Cuts .5" steel at 6 inches per minute!
WHAT YOU GET & TWO SCROLLS DOWN FOR DEMO VIDEOS:
* Plasma Cutter - Inverter Unit
* Ground Cable of 8' & ground clamp
* 1 each of a ceramic shield cup and swirl ring
* Phone support 7 days a week between 9am and 9pm EST
* Air filter/regulator, hose, clamps, mounting bracket
Additional Requirements not provided by us:
* Air supply required - 4 CFM @ 70 PSI
* 120/240 VAC power source & plug
Check out our videos. Watch this plasma cutter free hand cutting and piercing of 1/4" mild steel...
Watch another video of our plasma cutter cutting duct work.
http:// /watch?v=SC6Q67ZLvgA
Duty Cycle 60% @ 40 Amps and 100% @ 30 Amps. 0.50 inches rated cut at 6 inches per minute. Rated Output Current is 40Amps @ 240VAC. Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm.
Portable: Machine weighs only 19 lbs is 16 inches long x 6 inches wide x 9 inches high. This machine comes with torch, ground clamp and cables, air filter/regulator.
Machine is equiped with a large cooling fan.
Thermostaticly protected for a longer life span.
Advanced inverter technology, high cutting frequency.
Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm.
The newer semiconductor circuits in these machines are designed quite well. With reasonable care it should provide many years of trouble-free service.
Comes with a full ONE YEAR Warranty on both parts and labor USA BASED.
Sorry but returns are not accepted.If you have a problem with the machine our warranty protects you.
You may also call us any time between 9am and 9pm EST. if you have any questions... (***)-764-9942
THANK YOU FOR CONSIDERING GiantTECH