Commutator stone for armatures

Commutator stone for armatures

YOUR SOURCE FOR WELDING SUPPLIES
WELDING EQUIPMENT - SAFETY SUPPLIES
ARCAIR SLICE PACKS - LENCO SPOT
B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
Hours : Mon-Fri 8-5 Sat 9-12 EST
Email questions to : B.ayers@rockford-industrial.com
_______________________________________
ARMATURE AND SLIP RING COMMUTATOR RESURFACING STONES FOR WELDING MACHINES AND GENERATORS
COMMUTATOR STONES FOR RESURFACING ARMATURES, SLIP RINGS ON LINCOLN , MILLER, HOBART , THERMAL ARC, GENERAC, ONAN WELDERS
ALSO CLEAN AND RESURFACES SLIP RINGS ON MOST GENERATORS.
A LOT OF WELDING MACHINES WILL NOT GO TO HIGH IDLE RIGHT OR HAS A BAD ARC. THE SLIP RINGS AND ARMATURE SURFACES SHOULD BE KEPT CLEAN . AS THE BRUSHES WEAR AND ARC THEY LEAVE A CARBON DEPOSIT ON THE ARMATURE AND SLIP RINGS CAUSING MANY PROBLEMS EVEN NO ARC AT ALL. IF YOU REPLACE THE BRUSHES ON ANY WELDER THE BRUSHES NEED TO BE SEATED AND THESE STONES WILL HELP THAT PROCESS .
IF YOU HAVE A BRUSH THAT HAS ARCED ON THE SLIP RINGS AND LEFT A GROOVE THESE WILL IN MOST CASES REMOVE THE GROVES.
USE CAUTION WITH THESE STONES AS YOU ARE USING THEM NEAR REVOLVING PARTS .
AVAILABLE IN FINE AND MEDIUM GRIT.
_________________________________________________________________________
B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
Hours : Mon-Fri 8-5 Sat 9-12 EST
Email questions to : B.ayers@rockford-industrial.com
we only accept wire transfers. Please call for our banking info.
Personal checks take 2 weeks to clear