Rockford Industrial Area Revival Project - Moderated newsgroup > Motor Drives and Controls
> Rockford
> Industrial Park
> 4 pcs. of 1018 cold finished steel 1/8 x 1 x 8 3/4+
4 pcs. of 1018 cold finished steel 1/8 x 1 x 8 3/4+
4 pcs. of 1018 cold finished steel 1/8 x 1 x 8 3/4+
From: Jonathan Mendez
Subject 4 pcs. of 1018 cold finished steel 1/8 x 1 x 8 3/4+
FOUR PIECES OF AISI TYPE 1018 LOW CARBON COLD FINISHED STEEL
* TYPE OF STEEL: AISI TYPE 1018 LOW CARBON COLD FINISHED
* ANALYSIS: this steel contains – carbon, manganese, silicon, sulfur, and phosphorus
* THIS STEEL IS NORMALLY USED WITHOUT HEAT TREATMENT.
* IT CAN BE CASE HARDENED USING ANY OF THE STANDARD CARBURIZING METHODS AND SUBSEQUENT HEAT TREATMENTS.
* IT IS A FREE MACHINGING LOW CARBON STEEL WITH EXCELLENT MACHINABILITY ALLOWING FOR LONGER CUTTING TOOL LIFE
* ALL FOUR PIECES ARE THE SAME DIMENSIONS
* THICKNESS: 1/8 inch bar stock
* LENGTH: 8 3/4+ inches rough cut and de-burred (they are all over 8 3/4 inches and under 8 7/8 inches)
* PICTURE: shows the actual pieces being sold along with a 1 foot ruler graduated in inches for scale
Contact: jonathan_mendez@rockford-industrial.com (Jonathan Mendez)
