Rockford Industrial Area Revival Project - Moderated newsgroup > Motor Drives and Controls
> Rockford
> Airport Area
> Commander multi drill 4 / 8 spindle head v. good shape
Commander multi drill 4 / 8 spindle head v. good shape
Commander multi drill 4 / 8 spindle head v. good shape
From: Billy Oconnor
Subject Commander multi drill 4 / 8 spindle head v. good shape
Commander Multi Drill Model 900 Serial # 3740 Maximum drilling area 9" diameter. Input speed x 2 = output speed. There are 8 outputs from the geared section, 6 are equipped with u-joint drives, comes with 4 good spindle extensions & 1 which is bent ( not pictured). The extensions have size 'A' drill holders on the ends, which can be changed ( 3/16" shafts on the drill holders). The Spindle outputs from the geared section are 5/16" diameter. The unit mounts to a 3-1/2" diameter quill, there is a shoulder at 1" depth inside the adapter. I have an alternate adapter available for this which will mount the unit to a smaller 2-1/4" quill. It has an adjustable downstop on the clamp collar ( for a manual drill press). I will substitute at no charge if requested.
Feel free to email any questions.
Contact: B.Oconnor@rockford-industrial.com (Billy Oconnor)