New 416D - 40A plasma cutter/160A tig/150 arc welder

New 416D - 40A plasma cutter/160A tig/150 arc welder

New Dual Voltage 40A Plasma Cutter/160A Tig/150 Arc Welder
It is Brand New, fully tested DUAL VOLTAGE UNITED Plasma Cutter/Tig/Arc Welder. The retail price is much more than our asking price, but for a limited time, we are offering this unit for a fraction of the price.
This Unit is portable and operational on dual voltages. It's light weight of only 41 lbs with box, makes this unit a necessity at home or on the job.
· 40 Amps Plasma cutter: Duty Cycle 60% at 40 Amps and 100% at 30 Amps. 0.5 inches clean cut with 7.2 inches per minutes; 3/4 inches severance cut with 3.1 inches per minute. Rated Output Current is 40Amps under both AC 110V and 220V. Works in both 50 and 60 Hz with operating air pressure as 65 psi @ 3 cfm.
· 160 Amps Tig Welder: Duty Cycle 60% at 160 Amps ARC and 100% at 95 Amps ARC. Gas Flow: 2-5 L/Minute. It can weld all stainless steel.
· 150 Amps Arc Welder: Duty Cycle 60% at 150 Amps and 100% at 90 Amps.
well-known cutters. But the price is much lower than those machines.
· Portable: This machine weights only 35 lbs and 480 mm Length x 210 mm width x 310 mm height.
· Cutting Specs: (High Frequency Start)
1. 3" Per minute @ 3/4" Steel (Severance Cut)
2. 7" Per minute @ 1/2" Thick Steel
3. 17" Per minute @ 3/8" Thick Steel
4. Nozzle Int. 1.2mm Air Pressure 60psi
5. Cut Thickness 1/2" Cut Gas Flow 2.8cfm
UNITED CT416D machine unit, ground cable, Air hose, Air regulator, stick holder and cable, plasma cutter torch, tig torch and Initial plasma cutter Consumables.
No refund! The machine is sold with One year Warranty and we always honor our machine warranty. There is no reason to return the machine for refund.
ATTENTION: FOR DC WELDER, THERE IS NO FOOT PEDAL ASSOCIATED.
FOOTPEDAL ONLY WORKS ON AC WELDER.