Hp agilent 436A rf/microwave power meter

Hp agilent 436A rf/microwave power meter

HP Agilent 436A RF/MICROWAVE POWER METER
click on images below to enlarge
General purpose digital power meter intended for manual and automatic RF and microwave power measurements
* Compatible with the entire series of 8480 power sensors
* Measures either absolute or relative power
* Displays absolute power in either watts or dBm, while relative power is displayed in dB
* Frequency Range: 100kHz to 50GHz and 75 to 110GHz (depending on power sensor used)
* Power Range: -70dBm to +44dBm (100pW to 25W)(sensor dependent)
* Cal Factor: 16-position switch normalizes meter reading to account for calibration factor. Range 85% to 100& in 1% steps
* Cal Adj: Front-panel adjustment provides capability to adjust gain in meter to match power sensor in use
* Recorder Output: Proportional to indicated power with 1 volt corresponding to full scale and 0.316 volts to -5dB; 1 kohm output impedance, BNC connector
* RF Blanking: Open collector TTL; low corresponds to blanking when auto-zero mode is engaged
* Display: Digital display with four digits. 20% over-r
* We offer a 100% Satisfaction Guarantee that the item is as described!
* Questions will be answered to the best of our knowledge
* PERSONAL CHECKS ARE NOT ACCEPTABLE.
* Items can only be returned with prior authorization. Unauthorized returns will not be honored.
* Failure to follow these guidelines will invalidate both the return and the guarantee!