14' x 500 ton cincinnati mechanical press brake

14' x 500 ton cincinnati mechanical press brake

14' X 500 TON CINCINNATI MECHANICAL PRESS BRAKE
Serial # 30348 New 1957 Model # 19 Series x 12'
500 Ton Rating at Bottom of Stroke
Bed Size: 8" Wide x 14' 8-1/2" Long with 1/2" Tang Slot
Distance Between Housings: 12' 11-1/2" (155-1/2")
Material Bending Capacity: 3/8" x 14', 1/2" x 10', 5/8" x 6'
Maximum Pinching Capacity: 330 Ton
Maximum Stripping Load: 33 Ton
Maximum Eccentric Load Capacity: 500 Ton
Machine Stand: 11' 3-1/2" Above Floor Line
Machine Side Frames Extend 6" Below Floor Line
Machine Bed Extends 40" Below Floor Line
Recommended Floor Pit Size: 14" F-B x Wide x 44" Deep
Machine is 111-1/2" Overall Front to Back
Centerline of Bed to Machine Frame (Gap): 14-1/4"
Die Space: 14" (Stroke Down Adjustment Up) Approx.
Approx. Pit Required for Machine Side Frames: 56" F-B x 7" Wide x 7" Deep
Approx. Pit Required for Bed Plate: 5" Wide x 177" Long x 42" Deep
Motorized Ram Adjustment Motor with Internal Brake
Ram and Bed Machined for Small Angles (No Angle Plates)
Has All Upper Die Clamps Except for a 5" Space
Side Frame Mounted Tonnage Pressure Indicator Gage
Twin End Drive with Gear Guards
(2) Automatic Lubrication Systems
(4) 24" Long Front Mounted Work Support Arms
Air Actuated Mechanical Friction Clutch
Moveable Foot Pedal Activation Control
Hurco Model # 7 CNC Single Axis Back Gage,
Serial # HFAA9030125B, Wired for Single Phase, 115 Volts
(1) 1-1/4" x 3-3/4" x 151-3/4" Long V Punch Die (No Bottom Mate)
(1) 3-3/8" x 3-3/8" x 14' 1-1/4" Long 4-Way Bottom Die
(1) 14' Long Lower Adjustable Die Holder Rail 4" Wide x 2-3/4" High with
(2 Pieces) Male & Female Die, 3-1/4" Wide x 146-1/4" Long with
Have Machine Floor Plan Drawing, Parts & Operations Manual and Electrical
Wired for 3 Phase, 60 Cycle, 220/440 Volts
Floor Space: 10' x 16' x 11' 3" Height Above Floor Approx.
Weight Machine with Ram but Bed Off: 55,000 Lbs.
Weight of Bed Section: 19,000 Lbs
(2) I-Beam Sections have been Welded Inside the Frames for Moving Supports