Rockford Industrial Area Revival Project - Moderated newsgroup > Combustion Engine powered machines
> Winnebago
> Hvlp gravity feed spray gun - 1.7MM nozzle
Hvlp gravity feed spray gun - 1.7MM nozzle
Hvlp gravity feed spray gun - 1.7MM nozzle
From: Chandra Hale
Subject Hvlp gravity feed spray gun - 1.7MM nozzle
* Gravity feed action lets fluid flow downward using less air and offering better control over atomization and fluid output
* General purpose air cap sprays enamels, lacquers, metallics and urethane and handles a range of viscocities from fine surface finish to heavy body coatings
* Forged aluminum gun body and air cap for durability and long lasting performance
* Aluminum cup with "drip check" device to prevent spillage from the vent hole
* Stainless steel needle and fluid tip
* Use for basecoat, filler, primer and medium viscocity
* Maximum spray pattern approximately 10"
* Operating pressure: 30 PSI
* Avg. air consumption: 10 cfm
* Air inlet thread size: 1/4" NPT
Contact: c-hale@rockford-industrial.com (Chandra Hale)