Rockford Industrial Area Revival Project - Moderated newsgroup   >   Combustion Engine powered machines   >   Rockford   >   West   >   Sound technology 1400A low distortion audio oscillator

Sound technology 1400A low distortion audio oscillator


Sound technology 1400A low distortion audio oscillator


From: Tracy King
Subject Sound technology 1400A low distortion audio oscillator
Your Source for Quality Reconditioned Test Equipment. We are the best VALUE in test and measurement!
Sound Technology 1400A Ultra Low Distortion Oscillator
Performance Tested and Warranted
Check out our other great test equipment
Description: The Sound Technology 1400A is a stand-alone low distortion oscillator. Frequency coverage is 10 Hz to 110 kHz. Output level is continuously adjustable from 1 mV to 3 V. The extreme purity of the output signal permits it to be used to determine the residual distortion of Audio, spectrum, and wave analyzers. Distortion is typically < 0.001%. A fast response mode is available from a front panel switch that allows the oscillator to settle faster for frequency response testing. The output is single-ended and can be floated or grounded. This unit does not require additional power mainframes for operation.
Condition: Reconditioned and Performance Tested to meet manufacturers specifications. Clean unit inside and out. Physically inspected, hardware re-torqued, connectors treated with a preservative, controls and switches lubricated as appropriate, power supply electrolytics tested. Burned in for 72 hours and then performance tested. All knobs and switches are in good condition.
What do our grades mean? Click Here
Need Your Unit Repaired/Reconditioned
Please contact us prior to purchasing an item if you have a question. We're glad to assist in any way we can.
Calibration is not guaranteed unless the item is advertised as calibrated or you purchase calibration at the time of sale. We maintain a laboratory with high quality equipment in order to verify the performance of the items we sell. We can provide ANSI Z540.1 calibration services on most items sold, if desired. Please contact us for Repair, Reconditioning, or Calibration services.
* Item may have some cosmetic imperfections such as scratches, dents, cracks, sticker residue, and discoloration due to normal wear and tear. Every effort is made to make our items as cosmetically acceptable as possible. Abnormal cosmetic conditions are mentioned in the item condition.
Contact: t_king@rockford-industrial.com (Tracy King)