Rockford Industrial Area Revival Project - Moderated newsgroup > Combustion Engine powered machines
> Rockford
> Industrial Pk
> Itt pneumotive 5 hp vacuum pump assembly
Itt pneumotive 5 hp vacuum pump assembly
Itt pneumotive 5 hp vacuum pump assembly
From: Ines Webb
Subject Itt pneumotive 5 hp vacuum pump assembly
Pneumotive model 100 five HP vacuum pump assembly including pump, motor, belts, belt guard, baseplate, and exhaust muffler. This is a once-through-oil rotary vane vacuum pump. It uses non-detergent 30W oil which is metered into the pump through drip lubricators. The used oil has to be drained off and replaced as it is consumed. Pump reaches 25-26 In Hg. Displacement is about 100 CFM. This pump would be good for use with a vacuum receiver and and vacuum switch control for a vacuum forming or other intemittant use application. We have vacuum tanks and controls available if needed.
Motor is a Toshiba 230/460 volt high efficiency. A 2 inch x 24 inch long exhaust muffler is included with the pump.
Pump assembly was removed from a medical vacuum system in running order. We cleaned, painted, replaced oil, and tested. The pump runs OK, so did not tear down. Have a seond one available, but not yet tested.
Contact: ines-webb@rockford-industrial.com (Ines Webb)