Hp epm-441A powermeter with hp 8482H sensor E4418A mint

Hp epm-441A powermeter with hp 8482H sensor E4418A mint

The manuals for the EPM-441A and programming manual for the GP-IB interface are included. The manuals are still shrink-wrapped. You get everything you see in the photos.
This unit was in use for the past few weeks. Before that it had been stored for several years. It passes all self-tests and caligrates just fine.
The sensor has a frequency range of 100 Khz to 4.2 Ghz. New cost on this unit, with sensor, was $5000 +. The sensor alone sells for $800 to $1000 on the internet, used.
* Fast measurement speed (up to 200 readings per second, over the GPIB, with E-series sensors)
* Speed improvement of x2 using the 8480 series power sensor (compared to 437B)
* No range-switching delays with 8480 series sensors, and only one fast-range switch point with E-series sensors
* High-resolution display with backlighting for a wide viewing angle of displayed data
* Save and recall of up to 10 instrument states
* GPIB connector for remote control of all functions
* Code compatibility with 437B
* Conformity to CE and CSA standards
The HP Agilent E4418A is fully compatible with the 8480 series and the E-series power sensors (except the E9320A family). Depending upon which sensor is used, the E4418A can measure from -70 dBm to +44 dBm at frequencies from 100 kHz to 110 GHz.
Designed for bench and automatic test equipment (ATE) use, the HP E4418A makes fast (up to 200 readings per second with E-series sensors), accurate and repeatable power measurements.
Link to PDF Datasheet for the powermeter and the sensor:
http:// /DataSheet/HP_AGILENT/HP__ESeries.pdf
We will be adding items daily, so please check our “View seller’s Items” often!
Please feel free to ask questions!