Rockford Industrial Area Revival Project - Moderated newsgroup   >   Combustion Engine powered machines   >   Miller millermatic 212 mig welder package 907324

Miller millermatic 212 mig welder package 907324


Miller millermatic 212 mig welder package 907324


From: Maureen Monroe
Subject Miller millermatic 212 mig welder package 907324
A NEW MODEL RELEASED BY MILLER WITH MANY NEW FEATURES. SEE "NEW" IN THE FEATURES SECTION BELOW ADD SHIELDING GAS, WELDING WIRE AND START WELDING Features
Seven taps provide wider welding range of 30-210 amps with improved high and low ends to weld materials from 22 gauge up to 3/8 in (9.5 mm) thick in a single pass.
New! Angled, dual-gear-driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob.
New! Patent-pending EZ-Changeâ„¢ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
Add the optional Spoolmateâ„¢ 3035 spool gun for aluminum welding. Easy to install with direct hook up. And with Miller's exclusive Gun-On-Demandâ„¢, simply pull the trigger for either gun and you're ready to weld. No wasted time installing modules and using toggle switches.
New! Thermal Overload Protection
shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
New! EZ-Accessâ„¢ Consumable Compartment and Parameter Chart - convenient new flidown compartment that provides fast access to parameter chart and consumables.
New! Larger work area - now with longer 15-ft M-25 gun.
Less weld cleanup with Active Arc Stabilizer - patented Miller design provides excellent starts proven superior to the competition.
* Vocational/Technical Schools
* 160 Amps at 24.5 VDC, 60% duty cycle
* 50 - 700 IPM (1.3 - 17.8 m/min)
* 10 ft (3 m) power cord and plug
* New! 15 ft (4.6m), 250 amp M-25 MIG gun for .030/.035 in wire
* 10 ft (3 m) work cable and clamp
* Factory-installed dual gas solenoids
* Argon mix regulator/flow gauge w/hose
* New! Factory-installed running gear with EZ-Changeâ„¢ Low Cylinder Rack
* .030/.035 in reversible drive rolls
* New! Set-up and operation interactive CD
CLICK HERE TO SEE THE FACTORY SPECIFICATIONS ON THIS MACHINE
Contact: Maureen.monroe@rockford-industrial.com (Maureen Monroe)




Miller millermatic 212 mig welder package 907324