Noyes OPM1-3C optical power meter+

Noyes OPM1-3C optical power meter+

NOYES OPM1 Optical Power Meter
This portable optical power meter may be used to measure optical power (dBm) in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM1 can also measure the attenuation (insertion loss) of multimode or single-mode cables.
With only two controls – ON/OFF and wavelength – the OPM1 is our simplest to use optical power meter. Optical power in dBm and the calibration wavelength setting are displayed on an easy-to-read LCD display. The optical input port accepts Noyes thread-on style connector adapter caps. Adapter caps are required and must be ordered separately.
The OPM1 is fully N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.
Premises (Ge) and broadband (InGaAs) models
Our simplest to use optical power meter
NOTE: The OPM 1-2C at 850, 1300, 1310, and 1550 nm is also available upon request.
The OPM 1-3C also operates at 850, 1300, 1310, and 1550 nm but offers greater temperature stability needed for outside plant 1550 nm testing as with WAN, CATV, and Telco systems.
Includes 1 full year Noyes factory warranty