Rockford Industrial Area Revival Project - Moderated newsgroup   >   Combustion Engine powered machines   >   Rockford   >   East   >   Ultra 4 headed spot welder

Ultra 4 headed spot welder


Ultra 4 headed spot welder


From: Marian Small
Subject Ultra 4 headed spot welder
Pneumatic heads and roller table
The distance between the side plates (left to right) is 30”. Therefore the widest piece that can be passed through the welder is approximately 30” wide.
The distance from the welding heads to the frame (the throat depth) is 10”. Therefore, if you have a piece that is wider than 30”, you can only weld 10” from the end of the piece.
Freight costs to be quoted at time of sale from zip code 06787.
All freight costs to be paid by the purchaser.
Should you have questions, please contact Joe or Dick at (***)-484-4449.
Or email mariansmall@rockford-industrial.com or mariansmall@rockford-industrial.com.
Contact: mariansmall@rockford-industrial.com (Marian Small)




Ultra 4 headed spot welder